|
Bits & Pieces
I'm making corner post for each corner of the island out of 3" x 36" fluted fillers.
After sorting them for color and grain I cut the fronts and sides on the table saw.
I covered them with blue tape prior to gluing and clamping to protect the finish.
All clamped up, note the 1/4" plywood between the clamp pipe and the front of the column, cherry is soft and will have a half moon dent where the pipe is touching it if you do not protect it.
Another view.
Blocking for securing the crown.
Another view of blocking with crown installed.
When caulking a gap where you do not want to get ANY caulking on either surface use tape on both and just leave the gap.
Install and smooth the caulk.
Remove tape.
This is how a house should look prior to brick and or stone installation.
|